Operation Manual, Troubleshooting

20
General Problems
THE TOUCH PANEL DISPLAY IS DIFFICULT TO
VIEW
Check Solution
Is the brightness properly adjusted? ■ Tap the [LCD Control] key ( ) on the home screen to adjust the brightness.
YOU WERE LOGGED OUT WITHOUT LOGGING
OUT YOURSELF
Check Solution
Did Auto Clear activate? ■ When user authentication is used, the currently logged in user will be
automatically logged out if Auto Clear activates. Log in again.
If you are the administrator, change the time setting of Auto Clear or disable Auto
Clear in [Auto Clear Setting].
 "Settings (administrator)" → [System Settings] → [Common Settings] →
[Operation Settings] → [Condition Settings] → [Auto Clear Setting]
I DON'T KNOW WHERE THE IP ADDRESS SETTING IS
Check Solution
The IP address is set in the Network
Settings of Setting mode.
■ To set a permanent IP address, ask your network administrator for the IP address
assigned to the machine and other information necessary for the Network Settings.
 "Settings (administrator)" → [System Settings] → [Network Settings]
→ [Interface Settings]
I DON'T KNOW HOW TO CHANGE THE BACKGROUND
COLOR OF THE HOME SCREEN
Check Solution
You can change the background color
in "MFP Display Pattern Setting".
■ Open the action panel on the home screen and tap [MFP Display Pattern
Setting]. Enter the administrator password, and select the desired color from
patterns 1 to 5. For more information, see User's Manual (Touch Panel
Operation).
?
!
?
!
?
!
?
!