Operation Manual, User's Manual
Table Of Contents
7-10
SETTING MODE►SETTING MODE LIST
Disabling of Auto Paper Selection Disabled No Yes
2-12
Auto Selection Setting of Tray that is Supplied the Paper
Disabled No Yes
Disabling Registration of Custom Image Disabled No Yes 2-101
Disabling sending while copying Disabled No Yes 2-135
High Quality Scan from Document Feeder (B/W) Enabled No Yes
2-96
Quick Scan from Document Glass (B/W) Disabled No Yes
Auto Clear Before Copy Execution Also Disabled No Yes
2-5
Display Warning Message when Original is not
Detected
Disabled
No Yes
Initial Status Settings
Colour Mode Full Colour No Yes
2-8
Image Orientation Portrait No Yes
Paper Tray
Varies depending on the
machine configuration
No Yes
Exposure Type Auto No Yes
• Copy of Copy Disabled No Yes
• Colour Tone Enhancement Disabled No Yes
Copy Ratio 100% No Yes
Select magnification automatically according to paper
size, when paper tray is selected.
Disabled
No Yes
2-Sided Copy 1-Sided→1-Sided No Yes
Original Binding Book No Yes
2-9
Output Binding Book No Yes
Output Auto No Yes
Output Tray
Varies depending on the
machine configuration
No Yes
Offset Enabled No Yes
Separator Page No Yes
• Insert Before Job Disabled No Yes
• Insert After Job Disabled No Yes
Staple Sort
*1
– No Yes
Staple Position
*1
– No Yes
Punch
*2
– No Yes
Fold
*3
Fold inside No Yes
• Fold Multiple Sheets Together
*4
Disabled No Yes
Setup Items
Factory default setting
U A Page