Operation Manual, User's Manual

7-4
SETTING MODE►SETTING MODE
Displaying the setting mode (Web version)
When the machine is connected to the network, access the built-in Web server of the machine using the PC’s Web
browser.
From the setting mode of the machine, print the IP address of the machine and enter the address on the PC’s Web
browser.
1
Tap the [Settings] key.
2
Tap [Status] → [Network Status] from the menu.
3
Scroll the screen down and check
"IPv4 Address" in IPv4 Settings of
TCP/IP.
4
Start the Web browser on the PC, and
enter the IP address of the machine.
Start a Web browser on a PC on the same network the
machine is on, and enter the IP address of the machine.
Recommended Web browsers:
Internet Explorer: 11 or later (Windows
®
),
Microsoft Edge (Windows
®
),
Firefox (Windows
®
), Safari (macOS
®
),
Chrome (Windows
®
):
Latest version or immediately previous major release
Depending on the machine settings, user authentication
may be required to display the setting mode (Web version).
For password and other information required for user
authentication, contact the administrator of the machine.
Toner Quantity
Bk
C
M
Y
Operation
Guide
Enlarge
Display Mode
Settings Total Count Brightness
Adjustment
Job Status
10:15
Easy
Copy
CLOUD
PORTAL
Easy
Fax
Easy
Scan
Status
Machine Identification
Total Count
Device Status
Network Status
Firmware Version
Power Reset
Data List
List for User
List for Administrator
User Control
TCP/IP
TCP/IP:
IPv4 Settings:
IPv6 Settings:
DHCP:
IPv4 Address:
Subnet Mask:
Default Gateway:
Enable
Administrator Login
Top of Page
Enable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
System
Settings
Status > Network Status