Operation Manual, User's Manual

1-129
BEFORE USING THE MACHINE►MAINTENANCE
9
Replace the cleaning tool.
(1) Rotate the cleaning tool after putting it on
the boss and hook its edge (the side that
does not have a handle) to the claw on
the left side. Hook the cleaning tool with
the clean side face up.
(2) Place the right-hand side of the cleaning
tool on the inner side, spread across the
top of the claw.
(3) Hook the cleaning tool to the claw.
10
Install a waste toner box.
Push the waste toner box in completely.
11
Close the front cover.
You cannot close the front cover when the waste toner box is not attached.
12
Replace tray 1.