User`s guide

... and Windows CE

Extra NETSETUP.EXE :

--------------------

On some devices (like NEC and HP) the networking files are not include on the device. To

check this, open the "Control Panel" and look for the "Network" icon. If this is missing then

the netsetup.exe should be installed first. After this the setup.exe can be installed. On some

device it is necessary the do a "RESET" of the device. This can be done by the reset button

on the underside of the device. (Look for this in the Windows CE manual)

Other ORiNOCO/IEEE cards:

-------------------------

At this moment OEM cards are not supported directly. After installation of the drivers,

insertion of the card will show "Unknown card detected". It will ask the user for the driver to

be used. Enter WVLAN46.DLL" in the dialogbox and click "OK".

Others:

-------

On some CE-devices there was another file missing on the CE-device. The file

MFCCE20.DLL was missing. The symptom was that the ORiNOCO icon did not show in the

Control Panel.