User guide

4.5. WINDOWS 95 CDPD MODEM INTEGRATION 31
4.4.4 Sierra PP210 and WCE 1.0/2.0
Sierra Wireless has put together an application note that describes in detail what you
need to do to use the PocketPlus with WindowsCE Handheld PCs.
The information you need to obtain the relevant documents and software are as
follows:
PocketPlus with WCE Application Note in Postscript Format ¡239 KB¿: PP210-WinCEAppNote-
CE20.ps
PP210 Firmware 2.5.3 Zip File ¡1080 KB¿: ppmm-253.zip
4.4.5 Motorola 100C and WCE 1.0
In order to get the Motorola 100C to work with a WCE 1.0 HPC, you need bMOBILE
software from bsquare development http://www.bsquare.com. This is a SLIP (Serial
Line IP) driver for the Motorola Personal Messenger PM100C CDPD modem.
4.4.6 Verifying That Your Modem Works
You should verify that your WindowsCE HPC and your CDPD Modem are properly
configured and are fully functional by using some TCP/IP application such as the
Pocket Internet Explorer, before proceeding any further.
4.5 Windows 95 CDPD Modem Integration
4.5.1 Motorola PM100C
First of all, we need to customize the new PM100C using the utilities disks included
with the PM100C.
Preparing the Computer
1. Turn on your computer nad insert the diskette labelled ”PM100C Utilities for
Windows 95, Disk 1 0f 2” into the floopy drive – A:
Neda Users can access the software from: /dos/u/win32-neda-std/motorolaPM100C/disk1
2. Select RUN Command from the Start menu.
3. Type the command : A:/setup and then press Enter
4. You will be prompted to replace the first disk with the second one.
5. After Setup finished installing the application on your computer, click on Finish.