User guide

30 CHAPTER 4. CDPD CONNECTIVITY
10. Tap TCP/IP Settings...
11. Deselect Server-assigned IP address (ensure that the check box is not checked).
12. Enter your modem’s IP address in the IP address field.
13. Select “Use SLIP” (ensure that the check box is checked).
14. Deselect “Use software compression” and “Use IP header compression” (ensure
that the check boxes for those two items are not checked).
15. Tap the Name Servers tab.
16. Deselect Server-assigned addresses.
17. Enter your primary DNS IP address in the Primary DNS field. You can also enter
a secondary DNS IP address, if you have one, in the Secondary DNS field.
18. Tap OK.
19. Tap Next.
20. Enter 1 in the telephone number field. Enter your country and area code in the
appropriate fields.
21. Tap Finish.
22. (Optional) Tap on your new connection, then tap File and Desktop Shortcut.
23. Tap File and Close to close the Remote Networking window.
24. From the desktop, double-tap your new connection.
25. Ignore the username and password fields, and tap Connect. When presented with
the dial terminal enter:
at!cdpd
atdt
When the Connected window appears, you are connected to the Internet.
26. Tap HIDE to hide the connection window on the task bar. You are now free to
configure ”Inbox” or run Explorer.