User guide

28 CHAPTER 4. CDPD CONNECTIVITY
2. Double-tap Make New Connection.
3. Type a name for the connection in the field indicated.
4. Select Dial-Up Connection as the connection type.
5. Tap Next.
6. Select Motorola PM100C from the list of devices you want to use. If you don’t
see that choice on the list, ensure that the PM100C is inserted in the PC card slot
and the card lock is properly applied (Note: some HPCs do not have PC card
locks).
7. Tap TCP/IP Settings...
8. Deselect Server-assigned IP address (ensure that the check box is not checked).
9. Enter your NEI (your IP address) in the IP address field.
10. Select Use SLIP (ensure that the check box is checked).
11. Deselect Use software compression and Use IP header compression (ensure that
the check boxes for those two items are not checked).
12. Tap the Name Servers tab.
13. Deselect Server-assigned addresses.
14. Enter your primary DNS IP address in the Primary DNS field. You can also enter
a secondary DNS IP address, if you have one, in the Secondary DNS field.
15. Tap OK.
16. Tap Next.
17. Enter 1 in the telephone number field. Enter your country and area code in the
appropriate fields.
18. Tap Finish.
19. (Optional) Tap on your new connection, then tap File and Desktop Shortcut.
20. Tap File and Close to close the Remote Networking window.
21. From the desktop, double-tap your new connection.
22. Ignore the username and password fields, and tap Connect. When the Connected
window appears, you are connected to the Internet.
23. Tap HIDE to hide the connection window on the task bar. You are now free to
configure ”Inbox” or run Explorer.