Specifications

SM <P=001>
(Continued)
When an error message is displayed, proceed as follows:
Error messages
Meaning
Remedy
BLANK MD
● Nothing is recorded. ● Replace the disc with a recorded disc.
Can’t COPY ● You tried to record from a copy-protected disc.
● Replace it with a regular disc that can be
copied.
Can’t EDIT ● A track cannot be edited.
● Change the stop position of the track and then
try editing it.
Can’t REC ● Recording cannot be performed correctly due
to vibration or shock in the unit.
● Re-record.
Can’t T REC
● Timer recording is impossible or there is no
available space on the MD.
● Replace it with another disc.
CH ERROR ● There is something wrong with the CD changer.
● Turn the power off and then back to on, and press
the button.
DEFECT ● Since this disc has scratches on it, the recording
operation was skipped.
● Replace the disc with another recordable disc.
DISC ERR
● The disc is damaged.
● A TOC is not written on the MD or there is
something wrong with data.
● Reload the disc or replace it.
DISC FULL ● The disc is out of recording space.
● Replace the disc with another recordable disc.
EDIT OVER ● There is no space to make CD editing on the disc.
● Replace it with a disc that has enough time to
record.
MD ERROR ● No operation
● Contact the shop where you purchased the unit.
MECHA ERR*
(*: Number or sym-
bol)
● There is a mechanical problem and the disc is not
working properly.
● Turn off the power, and press the button.
NAME FULL ● The number of characters for the disc name or track
name exceeds 40.
● Shorten the disc or track name.
NO DISC ● A disc has not been loaded.
● The disc data cannot be read.
● Load a disc.
● Reload the disc.
NOT AUDIO ● The data recorded on this disc is not audio data.
● Select another track.
● Replace the disc.
PLAYBACK MD
● You tried to record on a playback-only disc.
● Replace it with a recordable disc.
PROTECTED ● The disc is write protected.
● Move the write protection tab back to its original
position.
TEMP OVER ● The temperature is too high.
● Turn off the power, and wait for a while.
TOC ERR*
(*: Number or sym-
bol)
● The disc is damaged.
● TOC information cannot be read.
● MD not specified.
● Replace it with another disc.
TOC FULL*
(*: Number or sym-
bol)
● There is no space to programme track numbers.
● Replace it with another recordable disc.
TOC FULL 1
● There is no space left for recording character
information (track names, disc names,etc.).
● Replace it with another recordable disc.
TOC W ERROR ● Recording is impossible.
● Contact the shop where you purchased the unit.
TRAY ERROR
● The CD tray operates incorrectly.
● Unplug the AC power lead, plug it back, and then
turn the power on.
U TOC ERR*
(*: Symbol)
● TOC information recorded on the MD does not
match the MD specifications or it cannot be read.
● Replace it with another disc.
● Erase all of the tracks, and try recording.
U TOC W ERR ● The TOC information could not be created properly
due to a mechanical shock or to scratches on the
disc.
● Turn off the power, and try to write the TOC again.
(Remove any source of shock or vibration whilst
writing.)
? DISC
● The data contains an error. ● Replace it with another disc.
0 0:00 ● Music is not being recorded.
● Replace the disc with another recordable disc.
MD-ZV30H TINSZ0217AWZZ
E-41