Specifications

<P=003>
HOW TO USE THE BUILT-IN TIMER
● Before setting the timer, make sure that the clock setting is correct. (Page 6)
● The start time and stop time, which are set with this operation, will be kept in memory until the AC power lead is
unplugged or the setting is changed.
■ To select the timer playback mode
Before timer playback, the following preparations are required.
● Load a CD or MD
● Select a CD to be played.
● Preset the radio station.
CD
DISC-1
DISC-2
DISC-3
MD
ON/STAND-BY
VOLUME
TUNER
(BAND)
MODE
ON/OFF
CD PLAY
1
2
3
CD MD DIGITAL EDIT
NAME /
TOC EDIT
TIMER /
DELETE
DISPLAY
ENTER
TRACK START
TUNING
CURSOR
REC
1 2 3
SURROUND
3D
TIMER /
DELETE
ENTER
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
2
3,4
5
1
2
3
6
7
8
9
1 Press the TIMER/DELETE button.
2 Turn the jog dial so that the "TIMER SET" display appears.
3 Within 10 seconds, press the ENTER button.
4 Select the timer mode using the jog dial.
5 Press the ENTER button.
● The start time setting display will appear.
■ To select the timer recording mode
Before timer recording, the following preparations are required.
● Load a recordable MD
● Preset the radio station.
1 Press the TIMER/DELETE button.
2 Turn the jog dial so that the "TIMER SET" display appears.
3 Within 10 seconds, press the ENTER button.
4 Select the timer mode using the jog dial.
5 Press the ENTER button.
● The start time setting display will appear.
■ To set the start time and the stop time
6 Turn the jog dial to set the hour at which to start, and then
press the ENTER button.
7 Turn the jog dial to set the minute at which to start, and then
press the ENTER button.
● If not set manually, the ending time will be automatically set
for one hour after the starting time.
8 Turn the jog dial to set the hour at which to stop, and then
press the ENTER button.
9 Turn the jog dial to set the minute at which to stop, and then
press the ENTER button.
MD-ZV30H TINSZ0217AWZZ
E-33