Specifications
<P=002>
RADIO OPERATION
■ Tuning
1 Set the ON/STAND-BY switch to ON.
2 Press the TUNER (BAND) button.
3 Press the TUNER (BAND) button to select the desired fre-
quency band. (FM or AM)
4 Press the TUNING ( or ) button to tune into the desired
station.
Manual tuning:
1 2 3 4 5
6
10
7 8 9 10/0
PROGRAM
MD/CD/TUNER DIRECT KEY
TIMESLEEP DISPLAY
VOLUME
MODE ON/OFF
SURROUND
AUTO
MARK
REC
MODE
AUX
3D
REC
BASS/
TREBLE
P-MODE
CD
CLEAR
ST-MODE
TUNER
BAND
MD
1 2 3
1 2 3
1
4
CD
DISC-1
DISC-2
DISC-3
MD
ON/STAND-BY
VOLUME
TUNER
(BAND)
MODE
ON/OFF
CD PLAY
1
2
3
CD MD DIGITAL EDIT
NAME /
TOC EDIT
TIMER /
DELETE
DISPLAY
ENTER
TRACK START
TUNING
CURSOR
REC
1 2 3
SURROUND
3D
2,3
2,35,6
1
ON/
STAND-BY
CD
MD
POW
ER
VOLUME
TUN
ER
(BAN
D)
TUNER
(BAND)
TUNER
(BAND)
CD M
D DIG
ITAL EDIT
N
A
M
E
/
T
O
C
E
D
IT
T
IM
E
R
/
D
E
LE
T
E
D
IS
P
LA
Y
EN
TER
TRACK
START
TUNING
CURSOR
REC
CD
MD
POW
ER
VOLUME
TUNER
(BAND)
TUNER
(BAND)
TUNER
(BAND)
CD
M
D
DIG
ITAL EDIT
N
A
M
E
/
T
O
C
E
D
IT
T
IM
E
R
/
D
E
LE
T
E
D
IS
P
LA
Y
ENTER
TRACK START
TUNING
CURSOR
REC
Press the TUNING ( or ) button as many times as required
to adjust the frequency shown on the display to the frequency
of the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
● When radio interference occurs during auto scan tuning, auto
scan tuning may stop automatically at that point.
● If a weak station signal is found during auto scan tuning, the
station will be skipped.
● To stop the auto tuning, press the TUNING ( or ) button
again.
5 To receive an FM stereo transmission, press the ST-MODE
button on the remote control so that the "STEREO" indicator
on the display lights up.
● "ST" will appear when an FM broadcast is in stereo.
6 If the FM reception is weak, press the ST-MODE button on
the remote control so that the "STEREO" indicator goes out.
● Although the reception changes to monaural, the sound
becomes clearer.
To switch the unit off after use:
Set the ON/STAND-BY switch to STAND-BY.
Notes:
● The tuners memory will store the last station you were listen-
ing to in each band, even when the ON/STAND-BY button is
switched to STAND-BY.
● If the unit receives a radio broadcast near a radio or a TV
set, the radio, the TV set or the unit may pick up noise.
Move the unit as far away from the TV set or radio as
possible.
Direct playback:
When the TUNER (BAND) button is pressed and the power is
turned on and the last received station will be selected.
Aerial adjustment
AM FM
MD-ZV30H TINSZ0217AWZZ
E-12