Specifications

Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)

Recording

Basic Operation

– Recording –

Check that the HOLD switch

on the back is released.

The unit does not work if the

switch is set to HOLD.

1 Press the REC button.

● Record pause mode is entered.

2 Begin playback on the stereo system con-

nected to this unit.

● To enable the record level to be set.

3 Press the REC LEVEL (

5 or

4) button

to adjust the recording level (analogue

connection only).

● Adjust the recording level so that the maximum

sound volume from the source makes the read-

ing swing somewhere between –4 dB and 0 dB.

0dB

4dB

● For digital connection, it is not necessary to ad-

just the recording level.

4 Press the PAUSE button on the stereo sys-

tem to enter the playback pause mode at

the point you wish to start recording.

●

Here you can select the track to be recorded.

5 Press the

0606

06 button to start the MiniDisc

unit recording.

6 Begin playback on the stereo system, the

output will be recorded.

Before recording

Level meter indicator

As for the details, see page 9.