Specifications

STANDARD SPECIFICATION - BUILDINGS
DPI REFERENCE TEXT - APRIL 2009
PAGE 47
REFERENCED DOCUMENTS
AS/NZS 4455.3 2008 Masonry units, pavers, ags and segmental retaining wall units - Segmental
retaining wall units
AS 4506 2005 Metal nishing - Thermoset powder coatings
AS 4552 2005 Gas red water heaters for hotwater supply and/or central heating
AS 4553 2000 Gas space heating appliances
AS/NZS 4600 2005 Cold-formed steel structures
AS/NZS 4671 2001 Steel reinforcing materials
AS/NZS 4680 2006 Hot Dip galvanized (zinc) coatings on fabricated ferrous articles
AS/NZS 4692.1 2005 Electric water heaters - Energy consumption, performance and general requirements
AS/NZS 4692.2 2005 Electrical water heaters - Minimum Energy Performance Standards (MEPS)
requirements and energy labelling
AS 4750 2003 Electrogalvanizing (zinc) coatings on ferrous hollow open sections
AS/NZS 4782.2 2004 Double-capped uorescent lamps - Performance specications - Minimum energy
performance standard (MEPS)
AS/NZS 4783.2 2002 Performance of electrical lighting equipment - Ballasts for uorescent lamps -
Energy labelling and minimum energy performance standards requirements
AS/NZS 4792 2006 Hot Dip galvanized (Zinc) coatings on ferrous hollow sections applied by a continous
or specialised process
AS/NZS 4858 2004 Wet area membranes
AS/NZS 4859.1 2002 Materials for the thermal insulation of buildings - General criteria and technical
provisions
AS 5039 2008 Security screen doors and security window grilles
AS 5040 2003 Installation of security screen doors and window grilles
AS 5601 2004 Gas installations
AS 5604 2005 Timber - Natural durability ratings
AS 6002 1999 Domestic electric meter enclosures
AS 6669 2007 Plywood - Formwork
AS/NZS 60598.1 2003 Luminaries - General requirements and tests
AS 60947.1 2004 Low-voltage switchgear and controlgear – General Rules
AS 60947.2 2005 Low-voltage switchgear and controlgear - Circuit breakers
SAA MP52 2005 Manual of authorization procedures for plumbing and drainage products
AS/ACIF S008 2006 Requirements for Authorised Cabling Products
AS/ACIF S009 2006 Installation Requirements for Customer Cabling (Wiring Rules)
SAA HB 40.1 2001 The Australian refrigeration and airconditioning code of good practice - Reduction of
emissions of urocarbon refrigerants - Commercial and industrial
SA HB 40.2 2001 The Australian refrigeration and airconditioning code of good practice - Reduction of
emissions of urocarbons in residential airconditioning applications
SA HB 161 2005 Guide to plastering
SA HB 301 2001 Electrical installations - Designing to the wiring rules
AS/NZS
ISO/IEC 15018 2005 Information technology - General cabling for homes
AUSTRALIAN PAINT APPROVAL SCHEME (APAS) SPECIFICATION NUMBERS
0014/1 One pack organic binder zinc rich pre-construction primer
0015/1 Full gloss alkyd enamel for interior and exterior use (buildings)
0015/3 Semi gloss interior enamel (buildings)
0016/1 Solvent borne undercoat for exterior and interior use (buildings)
0032 Metal primer – lead and chromate free (buildings)
0035/3 Two pack etch primer, chromate free
0114 One pack interior varnish (general purpose)
0115 Lightly pigmented solvent borne ranch nish for exterior timber
0117/4 Long life texture coating for exterior concrete and masonry - High build, high prole
0134 Latex primer for galvanised steel and zincalume (buildings)
0162/1 Zinc phosphate metal primer
Specifications March 2009.indd 47 11/03/2009 11:47:13 AM