Service manual

MD-MT831H/W
– 23 –
: Continuous record menu
PLAY
T R E C
Continuous Rrecord
A P # # # #
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set.
* In the start address set state the start address changes as follows when the [DISP] button is pressed.
• Continuous record from the current pickup position
: Continuous record menu
: Start address setting
: Continuous record
# # # #: Address
: Continuous record
# # # #: Address
PLAY
T R E C
A d 0 0 3 2
PLAY
A P # # # #
• Continuous record playback from any address
A d 0 0 3 2
0 0 3 2 H (initial value) 0 3 C 0 H 0 7 0 0 H 0 8 A 0 H
A d 0 3 c 0
DISP
A d 0 7 0 0
DISP DISP
DISP
A d 0 8 A 0
* In the start address setting state the start address change digit changes when the [MODE] button is pressed.
* In the start address set state the value of selection digit changes in the range of 0h to Fh when
the [SKIP UP/DOWN] button is pressed.
* In the continuous record state and start address set state the record laser power changes in the
range of "0h to Fh" when the [VOL UP/DOWN] button is pressed.
A d 0 0 3 2
1st digit (initial value) 2nd digit 3rd digit
A d 0 0 3 2
MODE
A d 0 0 3 2
MODE
MODE
9 5 0 H
: INNER switch position measurement menu
: Continuous playback (pit section)
# # # # : Address
PLAY
I N N E R
Inner Switch Position Measurement
S Q # # # #
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set.