User manual
– 9 –
MD-MT190H
Recording
Check that the unit is connected to the stereo system.
1
Press the REC button.
Record pause mode is entered.
2
Begin playback on the stereo system connected to this portable MD.
To enable the record level to be set.
3
Press the REC LEVEL
55
55
5 or
44
44
4 button
to adjust the recording level.
Adjust the recording level so that the maximum sound volume from the
source makes the reading swing somewhere between –4 dB and 0 dB.
This unit can adjust the digital recording level just the same as the ana-
logue recording.
Level meter indicator
Recording: continued
4
Press the PAUSE button on the stereo system to enter the play-
back pause mode.
Here you can select the track to be recorded.
5
Press the MENU/CHRG button repeatedly to select “REC MODE”.
6
Press the ENTER/SYNC button.
7
Press the MENU/CHRG button repeatedly to select recording mode.
8
Press the ENTER/SYNC button.
The mode will be set automatically after 7 seconds even if the
ENTER/SYNC button is not pressed.
9
Press the
0606
0606
06 button to start the MiniDisc unit recording.
10
Begin playback on the stereo system, the output will be recorded.
To stop recording
Press the :OFF/HOLD button.
When recording stops, “TOC” (Table
Of Contents) appears. Whilst “TOC”
appears, the MiniDisc recorded
contents have not yet been up-
dated.
To prevent the new recording from
being lost, it is not possible to re-
move the MiniDisc whilst “TOC” is
displayed.
To update the recorded contents
of the MiniDisc
Press the :OFF/HOLD button
whilst in the stop mode.
The power turns off after recorded
contents have been updated on the
MiniDisc.
Warning:
If the power is removed (Battery/AC
adaptor) whilst “TOC” is displayed, the
MiniDisc unit lid will remain locked until
the battery/main power is restored and
the unit is turned on. Your new record-
ings or edited changes will be lost and
your MiniDisc may become unusable.
TOC display
■
■
●
●
●
To the REMOTE
socket
Right
channel
Left
channel
L
R
1
Insert the earphones plug firmly into the earphones socket on
the remote control unit.
2
Plug the remote control into the REMOTE socket on the unit.
3
Insert a MiniDisc.
4
Press the
06 06
06 06
06 button.
Playback starts automatically with a playback only MiniDisc or a MiniDisc
which is protected against accidental erasure (Auto-play function).
Playback
To stop playback
Press the :OFF/HOLD button.
If the unit is not operated for at least 2 minutes whilst in the stop mode, the power will
shut off automatically.
■