User manual

– 8 –
MD-MT190H
2
1
44
33
1 Insert a MiniDisc
1 Slide the OPEN lever to re-
lease the compartment door.
2 Lift it up.
3 Insert a MiniDisc as shown.
4 Close the compartment door.
When you record on a MiniDisc,
check that the erase prevention tab
is set to the “recordable” position.
Recordable
Recording
prevented
Insert according to
the direction arrow.
2 Connect the AC adaptor
AC 230V, 50/60 Hz
To wall socket.
2 Insert the plug on the other
end into the DC IN 5V socket.
1 Plug the AC adaptor into the
wall socket.
To the DC IN 5V socket.
Before using the unit with a rechargeable battery, the battery has to be charged.
Caution:
Insert the plugs firmly.
When the unit is not in use for extended periods, remove the AC adaptor from
the wall socket.
●
●
LINE IN
RIGHT
LEFT
To connect to a stereo system with "LINE OUT" or "AUDIO OUT"
sockets (Analogue connection)
3 Connections
To the DC IN
5V socket
Red: To right
White: To Left
Supplied
connection
cable
If the audio system has only one pair of sockets,they are usualy for
input only and recording via this connection is not possible.
■
Hold
Orange mark
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Remote control unit
Preparation for use
The unit does not work
if the HOLD button is set to HOLD.
Hold
Released
CAUTION:
It is not recommendable to put the
MiniDisc into a rear pocket, as this
may damage the product when sitting.
Press the HOLD button for 2 seconds or more.