User Manual

03/3/25 MD_DR470H_UK_7.fm
66
MD-DR470H
MD-DR470H(E) TINSE0513AWZZ
References
-Error Messages-
Error Messages
A number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
BLANK MD "
Nothing is recorded.
(Replace the disc with a recorded
disc.)
BUSY "
A track is being moved.
Can't COPY "
You tried to record from a copy pro-
hibited MiniDisc.
"
You tried to record signals other
than music (such as data).
(Record using the analogue cable.)
Can't EDIT "
A track cannot be edited.
(Change the stop position of the track
and then edit it.)
Can't LOCK "
You tried to record or edit the MD
whilst operating the OPEN lever.
Can't PLAY "
Cannot play the MD.
Can't REC "
Recording cannot be performed
correctly due to vibration or shock.
Can't READ
(*)
"
The disc data cannot be read be-
cause the disc is damaged.
(Reload the Minidisc or replace it with
another one.)
Can't STAMP "
Stamp function does not work.
(Check the number of tracks.)
ERROR MES-
SAGES
MEANING
Can't WRITE "
Cannot save the TOC information
correctly to a MiniDisc.
DISC-FULL
(D-FULL)
"
The disc is out of recording space.
DEFECT! "
The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
Er-MD (**) "
The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distribu-
tor where you purchased the unit.)
GROUP
FULL
"
The total number of groups exceeds
99.
(Erase unnecessary groups.)
HOLD " The unit is in the hold mode.
BATT EMPTY
(LoBATT)
"
The rechargeable or alkaline battery
has run down.
LOCKED
(LOCKED)
"
You removed a MiniDisc whilst re-
cording or editing.
(Turn off the power before removing
the MiniDisc.)