Datasheet

29
EnglishDeutschFrançaisItalianoEspañolEnglish
Power management
The monitor is based on the VESA DPMS and the
DVI DMPM standards. To activate the power
management function, the video card and the
computer used with it must also conform to these
standards.
DPMS: Display Power Management Signalling
DMPM: Digital Monitor Power Management
DDC (Plug & Play)
This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or computer. It
transfers information such as degree of resolution
between the monitor and computer. You can use
this function if your computer is DDC compliant
and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.
Specifications
The DVI-I input connector pin
(DVI-I connector with 29 pins)
1 765432 8
9 151413121110 16
17 23
22
21201918 24
C1
C2
C3
C4
C5
No. Function No. Function
1 TMDS data 2- 16 Hot plug detection
2 TMDS data 2+ 17 TMDS data 0-
3 TMDS data 2/4 shield 18 TMDS data 0+
4 N.C. 19 TMDS data 0/5 shield
5 N.C. 20 N.C.
6 DDC clock 21 N.C.
7 DDC data 22 TMDS clock shield
8 23 TMDS clock +
9 TMDS data 1- 24 TMDS clock -
10 TMDS data 1+ C1 Analog red image signal
11 TMDS data 1/3 shield C2 Analog green image signal
12 N.C. C3 Analog blue image signal
13 N.C. C4
14 +5V C5 Analog GND
15 GND
Analog vertically
synchronized signal
Analog horizontally
synchronized signal
DMPM mode Screen
Power
consumption
ON Display on 29 W
OFF Display off 2 W
DPMS mode Screen
Power
H-sync V-sync
consumption
ON Display on Yes Yes
STANDBY No Yes
SUSPEND Display off Yes No
OFF No No
29 W
2 W