Service manual

Revision D 4-27
Troubleshooting: DC Motor Replacement
Series 2000 Treadmill
409110-004
DC Motor Replacement
Replacement
Instructions
1. Turn the power switch off, disconnect the power cord from the
wall outlet, and remove the shroud.
2. Unscrew the 6 screws on the electronics box side panel and
remove the panel.
3. Disconnect the speed feedback cable from the power board,
illustrated below.
4. Cut and remove all tie wraps on the speed feedback cable back
to the motor.
5. Remove 4 screws from power cable access box on top of motor.
6. Cut but-splice connectors, unscrew ground strap, remove
conduit lockdown nut. Remove conduit cable from access box.
MD1128-008C
Speed Feedback Cable
Power Board
Main CPU Board
Inside of Electronics Box
Disconnect
J12