Service manual

Revision D 4-8
Troubleshooting : Power PCB Theory
Series 2000 Treadmill
409110-004
J5-13
TEMP2 15V I/O LEVEL OverTemp cutout
J5-14 HALL5 OC5V OUT 10KHZ Hall sensor 5
/Tach B
J5-15 HALL4 OC5V OUT 10KHZ hall sensor 4/Tach A
J5-16 SHLD-GND GND COM DC Digital Ground
Table 4-3. J5 Drive Connector (Continued)
Table 4-4. J6 Elevation Motor
PIN NAME TYPE IN/OUT FREQ. COMMENTS COLOR
J6-1
220VUP PWR OUT 50/60 MOTOR RUN
CAP
BLK
J6-2 NC NC NOT
CONNECTED
J6-3 220VDN PWR OUT 50/60 MOTOR RUN
CAP
BLK
J6-4 220VUP PWR OUT 50/60 MOTOR BLAC BLK
J6-5 NC NC NOT
CONNECTED
J6-6 220VDN PWR OUT 50/60 MOTOR RED RED
J6-7 NC NC NOT
CONNECTED
J6-8 NC NC NOT
CONNECTED
J6-9 NC NC NOT
CONNECTED
J6-10 20VELEV PWR OUT 50/60 MOTOR BLUE BLU
J6-11 NC NC NOT
CONNECTED
J6-12 MOT20AGND GND COM DC MOTOR BROWN BRN
Table 4-5. J7 Elevation Feedback
PIN # NAME TYPE IN/OUT FREQ. COMMENTS COLOR
J71
+5V PWR OUT DC SENSOR
SUPPLY
RED
J72 ELEVFB ANA IN 5HZ SENSOR
OUTPUT 05V
GRN
J73 GND GND COM DC Digital Ground BLK