Service manual

Revision D 3-4
Maintenance : Inspection and Cleaning
Series 2000 Treadmill
409110-004
Inspection and Cleaning
Visual Inspection
Regularly inspect the AC power cord and all other cords and cables for
fraying or other damage. Perform safety tests on any repaired line cords.
Inspect all plugs, cables and connectors for bent prongs or pins. Verify
that all cords, socketed components, and connectors are securely
seated.
Inspect the following for excessive wear or damage:
■
Walking belt
■
Drive belt
■
Handrail and hardware
Test the stop switch assembly monthly.
Exterior Cleaning
Turn the treadmill system off. Clean the exterior surfaces with a clean,
soft cloth and a mild dishwashing detergent diluted in water. Wring out
the excess water from the cloth and take care not to drip solutions on
the keyboard or writer assembly. (Use anti-septic cleaner on the
handrails and walking belt.) Avoid contact with open vents, plugs or
connectors. Dry the surfaces with a clean cloth or paper towel.
Interior Cleaning
Complete any pre-service procedures prior to opening the unit or
performing any interior cleaning. Clean the unit as needed, but at least
once per month.