Service manual

Revision D 2-10
Equipment Overview : Operating Instructions
Series 2000 Treadmill
409110-004
Controlling the Treadmill
■
Turn the power switch on (1).
■
Use the controlling equipment to start the treadmill, adjust the
treadmill speed and grade, proceed through the exercise phases,
terminate the exercise session, and turn off the treadmill.
Emergency Stop Switch
Check
■
With the belt moving at a relatively high speed, press the
emergency stop switch. The treadmill belt will stop promptly
but the belt will not lock, allowing for removal of foreign objects.
To release the switch, turn the button 1/4-inch turn in either
direction.
■
Use the controlling equipment to terminate the exercise session
and turn off the treadmill.
WARNING
Keep hands, hair,
jewelry, and loose
clothing away from
moving parts.
M15287-26B
WARNING
Wait until treadmill belt
is moving before
placing feet on belt.
M15287-11B
WARNING
Do not place feet under
treadmill during
elevation changes.
Otherwise, serious
injury could result.
M15287-36A