User Manual

30
Specifications
Power management
The monitor is based on the VESA DPMS and the
DVI DMPM standards.
To activate the monitor's Power Management func-
tion, both the video card and the computer must
conform to the VESA DPMS standard and the DVI
DMPM standard.
DPMS: Display Power Management Signalling
DMPM: Digital Monitor Power Management
(DVI-D connector with 24 pins)
The DVI-D input connector pin
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 29W Yes Yes
STANDBY No Yes
SUSPEND Display off 2.6W Yes No
OFF No No
DMPM mode Screen Power
consumption
ON Display on 29W
OFF Display off 2.6W
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or PC. It transfers
information such as degree of resolution between
the monitor and PC. You can use this function if your
PC is DDC compliant and if it is set so that it can
detect the Plug & Play monitor.
There are many varieties of DDC due to the differ-
ences between systems. This monitor works with
DDC1 and DDC2B.
No. Function No. Function
1 TMDS data 2- 13 N.C.
2 TMDS data 2+ 14 +5V
3 TMDS data 2 shield 15 GND
4 N.C. 16 Hot plug detection
5 N.C. 17 TMDS data 0-
6 DDC clock 18 TMDS data 0+
7 DDC data 19 TMDS data 0 shield
8 N.C. 20 N.C.
9 TMDS data 1- 21 N.C.
10 TMDS data 1+ 22 TMDS clock shield
11 TMDS data 1 shield 23 TMDS clock +
12 N.C. 24 TMDS clock -
The analog signal input connector pin
Number Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4N.C.
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 DDC/VCC
10 GND
11 N.C.
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
(Mini D-sub connector with 15 pins)