Owner`s manual

I_'_e]ll_VplCll:lllel:l__y;y_qj_l_ll:l;ip]_.'_et;ll'Jl[e]_vl_

• LIVENESS (Liveness)

Function: Adjusts tile reflectivity of tile virtual "a,alls in tile hall by changing tile rate at which tile early reflections

decay.

Description: The early reflections of a sound source decay much faster in a room with acoustically absorbent wall

surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces

is referred to as "dead", while a room with highly reflective surfaces is referred to as "live". The

LIVENESS parameter lets you adjust the early reflection decay rate, and thus the "liveness" of the

rooln.

Control range: 0to 10

Time

SoLirce Sotlnd

Tilne

I Live

Time

_"" /

Small Reflecled

[ Sound

Small vahle = 0 Large value = 10

• S. INIT. DLY (Surround initial delay)

Function: Adjusts the delay bet'a, een the direct sound and the first reflection on the surround side of the sound

field. You can only adjust this parameter when at least two front channels and two surround channels

are 1.1sed.

Control Range: 1 to 49 msec

• S. ROOM SIZE (Surround room size)

Function: Adjusts the apparent size of the surround sound fiekt.

Control Range: 0.1 to 2.0

• S. LIVENESS (Surround liveness)

Function: Adjusts the apparent reflectivity of the v*irtualwalls in the surround sound field.

Control Range: 0to 10

• SB INI. DLY (Surround back initial delay)

Function: Adjusts the delay between the direct sound and the first reflection in the surround back sound field.

Control Range: 1 to 49 msec

• SB ROOM SIZE (Surround back room size)

Function: Adjusts the apparent size of the surround back sound field.

Control Range: 0.1 to 2.0

• SB LIVENESS (Surround back liveness)

Function: Adjusts the apparent reflectivity of the virtual wall in the surround back sound fiekt.

Control Range: 0to 10