Owner`s manual

This trait allows you to configure a multi-room audio system. You can control this unit from the second room using the

supplied remote control.

Only analog signals are sent to the second room. Any source you want to listen to in the second room must be

connected using the analog (AUDIO L/R) input jacks on this unit.

You need the following additional equipment to use the multi-room functions of this unit:

• An infrared signal receiver in the second room.

• An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second

room to the main room (to a CD player, for example).

• An amplifier and speakers for the second room.

• Since there are many pussible ways tu connect and use this unit in a multi-ruom installatiun, we recummm/d that you consult with your

nearest authorized YAMAHA dealer or service center about the Zone 2 connections that best meet your requirements.

• Sume YAMAHA models are able to connect directly to the REMOTE CONTROL OUT.jack of this unit. If you own these products.

you may not need to use an infrared emitter. Up to 6 YAMAHA components can be cuuuected as shown.

REMOTE

OUT IN OUT IN CONTROLOUT

This unit

• System configuration and connections example

DVD player

(orolher component) This unil

lnfl'aredemitter

Main room

REMOTE CONTROL OUT

ZONE 2 OUTPUT

_=_

Amplifier

Remole control

Infrared signal

receiver

Second room

ZONE 2 REMOTE IN

• When not using Ille main ruom. turn (Iowru the vulume of this unit in the main ruom. Atljusl the volume conlrul on the amplifier in the

secund room.

• To avuid unexpected noise. DO NOT USE the Zone 2 feature with CDs encoded in DTS.