Owner`s manual

.l:h_[o]l:li,[o]_Til:{o]ll._._|ll]:l-_- -

You can control other components by setting the

appropriate remote control codes. Codes can be set up for

each input area. For a complete list of available remote

control codes, refer to "LIST OF REMOTE CONTROL

CODES" at the end of this manual.

The following table shows the default component

(Library: component category) and the remote control

code for each area.

Remote Control Code Default Settings

Input Library Default

(component Manufacturer YAMAHA

area category) code

CD CD YAMAHA 0(X)5

MD/CD-R MD YAMAHA 0024

1X)23 1

TUNER TUNER YAMAHA

1X)33 2

DVD DVD YAMAHA 0098

DTV/CBL

V-AUX

VCR 1

DVR/VCR2 DVR YAMAHA 0208

_1 U.K. and Europe models

_2Other models

You may not be :able to operate your YAMAHA component even

if a YAMAHA remote cnnlrol code is initially sel as listed above.

II1 Ihis case, try to sel nther YAMAHA remote contrnl code(s).

1 Press an input selector button or :_ to

select the component you want to set up.

Press CODE SET using a ballpoint pen or

similar object.

The TRANSMIT indicator on the remote control

flashes twice.

Press the numeric buttons (0 to 9) to enter

the four-digit remote control code for the

component to be used.

Refer to "LIST OF REMOTE CONTROL CODES"

at the end of this manual.

The TRANSMIT indicator on the remote control

flashes twice, and the remote control code for the

selected component is set.

• If tile manuf_lcturer of yotlr component has more than one code,

try each nf them until you find tile correct one.

• If you wait for more than 3(1seconds during step 3, the setup

process is canceled. If this happens, start river frnn/step 2.