Owner`s manual

• ADVANCED SETUP menu items
Change the initial settings (indicated in bokt nnder each
parameter) to reflect the needs of your listening
environment.
Speaker impedance SF::'i MP==
Use to switch tile speaker impedance for this unit.
Choices: 8 (2 MIN, 4 (2 MIN
• Select 8 _22MIN to set the speaker impedance to 8 (2.
• Select 4 (2 MIN to set the speaker impedance to 4 (2.
SP IMP. Speaker
4 _2MIN
8 _2MIN
Fron(
Center
Stlrrotlnd
Surround back
Fron[
Center
StlrroLind
Surround back
Impedance level
If you use one set (A or BL
the impedance of each
speaker must be 4 _.)or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8 _.)or
higher.
The impedance of each
speaker must be 6 _.)or
higher.
If you use one set (A or B),
the impedance of each
speaker must be 8 _.)or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16_2or
higher."
The impedance of elch
speaker must be 8 _.)or
higher.
The Canada model cannot use two separale speaker syslems
(A and B) simultaneously when SP IMP. is sel to Ihe 8 (2 MIN
position.
Factory presets :::::::::::::::::::::::::
Use to reset all parameters to the factory presets
(see page 93).
Choices: {3ANGEL, RESET
• Select CANCEL if you do not want this unit's
parameters to be initialized when you reset the factory
presets.
• Select RESET if you want all of this unit's parameters
to be initialized when you reset the factory presets.
Note
Thi set ine does no aHec ADVANCED SETUP menu i em
parameters.
Remote REMOTE
Use to switch the ID for the remote control of this unit.
Choices: ID1, ID2
• Select IDI to operate this unit using the default code.
• Select ID2 to operate this unit using an alternative
code.
You must also make settings for the remote control (see page 77).
< Asia and General models only >
Tuner TU
Use to switch the frequency step selection according to the
frequency spacing in your area.
Choices: AM1 0/FMIO0, AM9/FM50
• North, Central and South America:
AM 10/FM 100 (kHz)
• Other areas: AM9/FMS0 (kHz)
73