Owner`s manual

The ADVANCED SETUP menu is displayed in the front

panel display.

--'4<:

• During the :_dv:mced setup procedure. :mdiu output is hinted.

• During tile advanced setup procedure, only the STANDBY/ON

:rod STRAIGHT (EFFECT) buttons, and PROGRAM selector

buttons on tile front p:mel are available for operation.

Rotate PROGRAM to move through the menu

and select the item you want to set up.

See the end of this section t_r :l complete list of

available parameters.

PROGRAM

[__,TtM[o]Av_

Be sure to set the speaker impedance before using this unit

to play back audio or video signals.

(U.S.A. model)

3 Press STRAIGHT (EFFECT) repeatedly to

toggle between the available parameters.

1,4 1,3 2

Turn off the power to this unit, and while

holding down STRAIGHT (EFFECT), press

STAN DBY/ON.

This unit turns on, and the ADVANCED SETUP

menu appears in the front panel display.

STrtAIGHT

While holding

down, press

4 Press STANDBY/ON to confirm your

selection.

This completes the advanced setup procedure.

The settings you made are reflected the next time this

unit's power is turned on.