Owner`s manual

li'iVt_yi_|l#/|'fh'(•
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
Tile preset nmnber, the MEMORY aM AUTO
indicators flash. Alter about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
• Ally stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If tile number of received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
autonmtically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it mammlly,
and store it by following the procedure in "Manually presetting
stations".
Automatic preset tuning options:
You can select tile preset number fronl which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
Alter pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING/CH <11 C:>
to select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to ES.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING/CH <1 to begin
tuning toward the lower frequencies.
Memory back-up
The nlemory back-up circuit prevents tile stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut clue to
power faihlre. However, if the power is cut for nlore
than one week, the preset stations nlay be cleared. If
so, store the stations again by using the presetting
station methods.
• Manually presetting stations
You cala also store up to 40 stations (8 stations ill 5 groups,
AI through E8) manually.
1
2
(U.S.A. model)
3 4 2,5
Tune into a station.
See page 38 for tuning instructions.
i7 ...................
,, .H!'! b ,,'.>L0 !<h!1!:
When tuned into a station, the front panel display
shows the frequency of the station received.
Press MEMORY (MAN'L/AUTO FM).
The MEMORY indicator flashes for about 5 seconds.
£_E ".. I /
..........
/ ] -..
Flashes
Press AIBICIDIE (NEXT) repeatedly to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
Tile group letter appears. Check that tile colon (:)
appears in the front panel display.
¢
Presetgroup
40