Owner`s manual

• When playing a DTS-CD/LD, be sure to set the INPUT MODE

to DTS.

• If the digital output data of tile player has been processed in m]y

way, you may not be able to perform DTS decoding even if you

make a digital connection between this unit and the player

depending on the player.

• Displaying information about the input

source

Youcan display the type, format and sampling frequency

of the current input signal.

1 Select the input source.

Press AMP to select the AMP mode, then

press STRAIGHT so that "STRAIGHT"

appears in the display.

AMP '

STRAIGHT

then

•/_ItF_N,"I

Press/,, I ",/to display the following

information about the input signal.

_E_ET/CH

(Format)

'1 i"_

ai> -.

i"'.:::_'l'._::,

i::"]._iill

Signal format display. When the nnit

cannot detect a digital signal it

automatically switches to analog input.

Number of source channels in the input

signal. For example, a multi-channel

soundtrack with 3 front channels, 2

surround channels and LFE, is

displayed as "3/2/LFE".

Sampling freqnency. When the unit is

unable to detect the sampling

frequency "Unknown" appears.

Bit rate. When the unit is unable to

detect the bit rate "Unknown" appears.

Flag data encoded with DTS or Dolby

Digital signals that cue this unit to

automatically switch decoders.

",lf'rh,,Jlt"H"ll

....'::',::,:,',,a:::