Owner`s manual

• Remote control operation
AMP
Sound field
program
buttons
Press AMP to select the AMP mode, then press
one of the sound field program buttons to select
the desired program.
The name of the selected program appears in the front
panel display.
¢
9V_'_ yen1 VmX _Vm_L _ OW _ _D,_¢D_ IUNEr_ CD r_HOHO
WLUME
Program name
Choose a soundfield progranl based onyour listening preference.
and not on lhe uame of Ihe pl'o_ram.
• When you select an input source, this unit automatically selects
the last sound field program used with thai source.
• Sound field programs cannot be selected when MULTI CH
INPUT is selected.
• Sampling lhequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz. then sound field
programs will be applied.
•/_ItF_PL"I
• Enjoying multi-channel software
If yon connected a surround back speaker, use this feature
to enjoy 6.117.1-channel playback for multi-channel
sources using the Dolby Pro Logic llx, Dolby Digital EX
or DTS-ES decoders.
Press AMP to select the AMP mode, then press
EXTD SUR. on the remote control to switch
between 5.1 and 6.1/7.1-channel playback.
5M_p' EXTD SUR.
To select a decoder, press < / ) repeatedly when
PLIIxMusic (etc.) is displayed.
Auto (l::ii...iiO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.117.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.11
7.1 channels.
Decoders (select with < / >)
Yon can select from the following decoders depending on
the format of the software you are playing.
LJ{ I _ ':.:'{"]l'd.. 1 'l g:,
i L...L ._............
For playing back Dolby Digital or DTS signals in 7.1
channels nsing the Pro Logic Ilx movie decoder.
L.u , _ ':.:'rqi .i.:::.'i P'.
i L...t.._ ...............
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic Ilx nmsic decoder.
Fq:.:'./ F>::;
For playing back Dolby Digital signals in 6.117.1 channels
using the Dolby Digital EX decoder.
DTS signals are played back in 6.117.1 channels using the
DTS-ES decoder.
Fq:.:'.
For playing back Dolby Digital or DTS signals in 6.117.1
channels using the Dolby Digital EX decoder.
Off (0F:q:::)
Decoders are not used to create 6,1/7.1 channels.
-4:--
When "SUR. B L/R SP" is sel Io SMLxl or LRGxl (see
page 64). Ihesurround back channel will be oulput from Ihelefl
SURROUND BACK speaker lerminals.
33