Owner`s manual

Select a sound field program if desired.
Use PROGRAM (or press AMP to select the AMP
mode, then press one of the sound field program
buttons) to select a sound fiekt program. See page 55
I_r details about sound field programs.
PF_OGRAM
Front panel
or
Remote control
• To listen with headphones ("SILENT
CINEMA")
"SILENT CINEMA" allows you to enjoy multi-channel
nmsic or movie sound, including Dolby Digital and DTS
surround, through ordinary headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the front panel display.
• This unit will not be set to "SILENT CINEMA" when MULTI
CH INPUT is selected as tile input source.
• "SILENT CINEMA" is not effective when PURE DIRECT or
the 2ch Stereo program is selected, or in STRAIGHT mode.
•/_l_:_I'f,"I
• To adjust the tone
You can adjust the tonal quality TONEOO,T_OL
of your front left and right,
center, and subwoofer speakers or
headphones (when connected).
Press TONE CONTROL on the _,
front panel repeatedly to select
TREBLE or BASS, then rotate PROGRAM
PROGRAM to the right or left to
increase or decrease.
• Select TREBLE to adjust the
high frequency response.
• Select BASS to adjust the low
frequency response.
-#-
Speakerand headphone adjustments are stored independently.
• TONE CONTROL is not effective during playback in the
PURE DIRECT mode. or when MULTI CH INPUT is selected
(page 32).
• When TONE BYPASS is set to "AUTO" (page 67), and BASS
and TREBLE are set to 0 dB. audio output automatically
bypasses this unit's tone control circuitry.
• To mute the sound
Press MUTE on the remote control.
The MUTE indicator flashes in the
front panel display.
To resume the audio output, press
MUTE again (or press VOLUME /+).
The MUTE indicator disappears from
the display.
-#-
Youcan a@lst the muting level (see page 67).
31