Owner`s manual

1
If a warning screen appears
Press ENTER to display detailed information
about the warning.
Press ( / > to switch between warning messages.
C,D:iii T_D,q=
R_wUi_ i _ _r=i
-* idF_IRiI!HG (3)
REE;ULT
SF' : 5'4/Ch, !
I:q:5r_ !_,,,,?' J2,,_?÷'_
)SET CPlICEL
Ill '[_] ; LIp/[!oal_/
[EHTEP]: Enter
iffiP,l-'b'ilq'l
<OUT OF F'HFIS;E)
FL
CEHTER
F'L F'F,:
SL SR
EBL 5BR
[<] '[)]_Se!ect
[ EHTER ] _Pe{/,IP h
W-1 warning screen
For details about each message, see page 29.
• Warnings let yuu know about potential problems detected
during auto setup. Warnings will not cancel the auto setup.
• The munber of warnings is displayed to the right of
"WARNING".
• When the warning is not applicable to a speaker, " -' is
displayed.
When you are finished, press ENTER to
return to the RESULT:EXIT screen.
Continue from step 7 on page 26.
• If yuu change speakers, speaker positions, or the layout of your
listening environment, perform auto setup again to re-calibrate
your system.
• Depending on listening environments. SWFR PHASE:REV
appears in AUTO:CHECK and SUBWOOFER PHASE
parameter in the SETMENU/see page 65) is automatically set
to REVERSE. To select the desired setting, change the
SUBWOOFER PHASE parameter in the SETMENU.
• In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoufer.
27