Owner`s manual

[_: !ll/_olAvl

If you are using 4 or 6 ohm speakers, set the impedance to

4 or 6 ohms as follows before turning on the power.

Be sure this unit is in the standby mode.

Turn off the power to this unit, and while

holding down STRAIGHT (EFFECT), press

STANDBY/ON.

This unit turns on, and the ADVANCED SETUP

menu appears in the front panel display.

S"rRAI_HT

While holding

down, press

When all connections are complete, turn on the power of

this unit.

(U.S.A. model)

Rotate PROGRAM to move through the menu

and select "SP IMP.".

PROGRAM

3 Press STRAIGHT (EFFECT) repeatedly to

select "4 _) MIN".

4 Press STANDBY/ON to turn off the power.

1 Press STANDBY/ON (or SYSTEM POWER on

the remote control) to turn on the power of

this unit.

Front panel Remote control

2 Turn on the video monitor connected to this

unit.

The setting you made is reflected the next time this

unit's power is turned on.