Owner`s manual

[_MM [o]; j
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
• Cable indications
For analog signals
left analog cables _IIIL
right analog cables _1_
For digital signals
optical cables -,,,,,,,,,,,,,,,,_ d_o ' _
coaxial cables :,{_[
For video signals
video cables _': t[5_J
S-video cables ,iUg'.i
component video cables
• Analog jacks
You can input analog signals from andio components by
connecting audio pin cable to the analog jacks on this unit.
Connect red plugs to the right jacks and white plugs to the
left jacks.
• Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
the input signals from the COAXIAL jack. All digital
input jacks are compatible with 96-kHz sampling digital
signals.
This unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only output to the
analog OUT (REC).jacks. Likewise audio signals input to the
digital (Ot_ICAL or COAXIAL) jacks are only output to the
DIGITAL OUTPI JT.jack.
Dust protection cap
Pull out the cap from the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be snre to put the cap back in
place. This cap protects the jack from dust.
• Video jacks
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input through the S VIDEO jacks on this unit
are automatically converted for output through the VIDEO
jacks. When VIDEO CONV. is set to ON (see page 70),
signals input through the VIDEO jacks can be output
through the S VIDEO and COMPONENT VIDEO jacks.
Likewise, signals input through the S VIDEO jacks can
also be output through the COMPONENT VIDEO jacks.
COMPONENT VIDEO
VIDEO SW_EO p_ p_ ¥
@ @ @@@
VIDEO jacks
For conventional composite video signals.
S VIDEO jacks
For S-Video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into hnninance (Y) and
color difference (Pro Pk) to provide the best quality in
picture reproduction.
r- ..................................................................................................... ,
Signal flow inside this unit
Output
Input (MONITOR OUT)
.............
....-;;7.'"
S V_DEO __
VIDEO
When signals are input through both the S VIDEO and VIDEO
.jacks, signals input through the S VIDEO.jack have priority.
15