Quick Guide

10
E
Installation (Continued)
Portrait orientation
Run the cables along the hollow on the front side and out
between the legs of the back side.
7. Securethemonitortothestandusingthetwoxing
screws.
Landscape orientation
Fixing screws (supplied)
Portrait orientation
Fixing screws (supplied)
Installing on a table
(Pen writing position/Horizontal
position)
Remove the monitor from the stand and place face-down on a
table or other level surface.
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the ap. (LL-P202V)
• After removing the monitor from the rack stand, store the
stand so that the screws will not be lost.
n
LL-P202V
Pen writing position
Place the monitor on a table or other level surface.
1. Holdtheapbythedepressiononthebackofthe
monitorandpulltheapup.
Depression
2. Place the monitor where you want to use it.
Horizontal position
Place the monitor on a table or other level surface.
Caution
• When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.