LCD MONITOR TOUCH DISPLAY DRIVER OPERATION MANUAL Applicable models PN-K322B/PN-K322BH/LL-S201A for Mac Version 1.
Contents Introduction.......................................................................3 System Requirements...................................................3 Setting up the Computer..................................................4 Installing the touch display driver..................................4 Touch Panel Settings........................................................5 How to configure settings..............................................5 Calibration......................................
Introduction System Requirements To use the touch panel, the touch panel must be connected to a computer, and the touch display driver must be installed on the computer. OS Mac OS X v10.6, Mac OS X v10.7, Mac OS X v10.8 CPU Intel processor Memory At least 2 GB Free space on hard drive At least 5 MB TIPS • Depending on the application software, touch operation may not be possible (for example, if the application processes mouse and other operations independently).
Setting up the Computer To use the touch panel, the touch display driver must be installed and the touch panel must be connected to your computer. Installing the touch display driver The touch display driver is a program that enables you to use the touch panel to operate the computer that is connected to the touch panel. Caution • To install, an administrator name (user name) and password are required.
Touch Panel Settings The touch display driver starts automatically and the icon ( ) appears on the menu bar. TIPS • If PN-K322B (or PN-K322BH) and LL-S201A are connected at the same time, a screen for selecting the model will appear each time you select a setting. • Depending on the connected model, the screen image is different. How to configure settings nConfiguring settings from the menu bar 1. Click the touch display driver icon ( 2. Click a menu to change a setting. ) on the menu bar.
Touch Panel Settings nSettings when two devices are connected at the same time If PN-K322B (or PN-K322BH) and LL-S201A are connected at the same time, select the model whose settings will be changed. * Two models cannot be set at the same time. Caution • If two displays of the same model are connected, touch operation will only be enabled on one model. 1. Click “System Preferences” from the Apple menu ( ). 2. Click “SharpTouchDisplay”. The “Device Selection” screen appears. 3.
Touch Panel Settings Calibration If black bands appear at the top and bottom or left and right of the screen, perform position adjustment so that the mouse cursor correctly moves to the point that is touched. * If black bands appear both at the top and bottom and at the left and right, the touch position is not correct. In this case, change the display. nCalibration Method Follow the steps below to configure the setting. 1. Click the touch display driver icon ( 2. Click “Calibration”.
Touch Panel Settings Properties Settings for the touch action can be configured in the properties. nDouble Click Range Set the range over which the position can shift between the first touch and the second touch and still be recognized as a doubleclick (“Narrow” (8 pixels) to “Wide” (64 pixels)). To return the setting to the default setting, click “Default” (32 pixels). nDouble Click Speed Set the time that is recognized as a double-click.
Touch Panel Settings nRight-click You can set press and hold to be recognized as a right click.* Enable press and hold for right-clicking When the checkbox is selected, press and hold is recognized as a right click. Press and Hold Duration Set the time until press and hold is recognized as a right click (“Short” (0.5 sec) to “Long” (1.5 sec)).
Uninstalling the Driver Software Caution • To uninstall, an administrator name (user name) and password are required. 1. Disconnect the USB cable. 2. Execute uninstall. (1) Double-click the “TouchDisplay” folder, and then double-click the “Mac” folder. (2) Double-click “TouchDisplayDriver Uninstaller.app”. (3) Click “Uninstall”. • If a screen prompting you to enter the name and password appears, enter the name and password of the administrator and click “OK”. 3.
Touch Action Touch modes are finger/pen mode, pen-only mode, and fingeronly mode. The default setting is finger/pen mode. TIPS • To change the touch mode, see the manual for the LCD MONITOR (PN-K322B/PN-K322BH/LL-S201A). • Select the action to be used in Function Setting. (See page 9.) • You can not only move the cursor without tap operation. nCommon finger and pen actions Tap Same action as left-clicking a mouse. Touch with your finger/pen.
Touch Action nFinger actions TIPS • The screen may not respond correctly in the following cases: Touching is too quick The distance between the two points is too short • Operation with the touch pen is not possible. Pinch with two fingers Use in a screen that is capable of reduction/enlargement. Touch the screen with two fingers and move your fingers closer together to reduce the view, or apart to enlarge the view. Click or tap with two fingers Same action as a secondary click.
Touch Action Scroll left or right with two fingers / Swipe with two or three fingers Use cross page swipe. Swipe left or right with three or four fingers Move an application to the front. Swipe up with three or four fingers Display Mission Control. Swipe left from the right edge with two fingers Display the notice center. Tap with three fingers Check the tapped text in a dictionary or other resource. Swipe down with three or four fingers Display Application Exposé.
Touch Action Spread with thumb and three fingers / Swipe up with four fingers Touch the screen with 4 fingers, and move your thumb and 3 fingers apart to show the desktop. (OS X v10.7/v10.8) Swipe with 4 fingers to show the desktop. (OS X v10.
PN-K322BPN-K322BHLL-S201A DM EN13J(1)
