User Manual

E32
Setting TV channels
Changing the programme positions
(SORT)
The programme positions for individual
programmes can be freely changed.
1.Display the “PROGRAMMES” screen by
performing steps 1 to 4 of “Saving broadcast TV
channels in the memory (AUTOMATIC
SEARCH)” on page E30.
2.Select “SORT” using the MENU button (monitor)
or the buttons (remote control), and press
the OK/BRIGHT MODE button (monitor) or the
OK button (remote control).
SORT < TV/AV >
00 05 10 15
01 E02 06 11 16
02 E03 07 12 17
03 E04 08 13 18
04 09 14 19
3.Select the desired programme using the
buttons (monitor) or the buttons
(remote control), and press the
OK/BRIGHT MODE button (monitor) or the OK
button (remote control).
Move mode will be activated.
4.Select the desired position using the
buttons (monitor) or the buttons (remote
control) and press the OK/BRIGHT MODE button
(monitor) or the OK button (remote control).
The selected programme will be moved to the
selected position.
Note:
- When moving the programme, the buttons
(monitor) or the
buttons (remote control)
are not available.
5.Exit the screen using the INPUT button (monitor)
or the MENU button (remote control).
Erasing the programme range
The individual programme or programmes in a
consecutive range can be erased.
1.Display the “PROGRAMMES” screen by
performing steps 1 to 4 of “Saving broadcast TV
channels in the memory (AUTOMATIC
SEARCH)” on page E30.
2.Select “ERASE PROGRAMME RANGE” using
the MENU button (monitor) or the buttons
(remote control), and press the
OK/BRIGHT MODE button (monitor) or the OK
button (remote control).
ERASE PROGRAMME RANGE < TV/AV >
00 05 10 15
01 E02 06 11 16
02 E03 07 12 17
03 E04 08 13 18
04 09 14 19
3.Select the programme at the beginning of the
desired range to be erased using the
buttons (monitor) or the buttons (remote
control), and press the OK/BRIGHT MODE
button (monitor) or the OK button (remote
control).
4.Select the programme at the end of the range
using the buttons (monitor) or the
buttons (remote control).
When you want to select a single programme,
skip this step.
5.Press the OK/BRIGHT MODE button (monitor) or
the OK button (remote control) to erase the
selected programme(s).
All subsequent programmes move up.
6.Exit the screen using the INPUT button (monitor)
or the MENU button (remote control).