Installation Manual RESU 7H DLT Type-C

33
6. Check for voltage at power cable
terminal.
7. Disconnect the communication cable
from the communication port.
8. Disconnect the power cable connector
from the terminal block.
Disconnect the positive terminal
(+) ① rst, and next the negative
terminal (−) ② and nally ground
terminal. ③
9. Disconnect power cable connector.
10. Assemble transparent protection
cover. Close the wiring box cover, and
lock the ratchet.
11. Loosen the two hex-socket screws
using a socket wrench to detach the
battery pack from the wall using lift
handles.
CAUTION
According to regional regulations,
several people may be required for
moving equipment.
12. Repack in Box (See 3.1.1)
Uninstallation & Return