Installation Manual RESU 7H DLT Type-C

32
6 Uninstallation & Return
6.1 Return/Replacement instructions
6.1.1 Uninstallation from the wall
1. Switch OFF the Inverter before
starting the uninstallation of the
battery pack.
When the inverter operate(switch
on/o), installer must follow the
installation guide for the inverter
2. Press the two buttons and pull the two
latches (marked position) on the rear.
3. Open the wiring box cover (about
2~10 degrees), and pull to remove it.
4. Switch o the circuit breaker.
5. Loosen the screw (marked position),
and remove the transparent
protection cover.