Installation Manual RESU 7H DLT Type-C

21
Installation
3.1.9 Installing the Battery Pack
CAUTION
Make sure that the inverter AC and DC disconnects are turned o before
connecting the power cable to the battery pack.
Install battery pack in the following order
1. Fix the lift handles to the hex-socket
screws on the rear (marked position)
of both left and right sides.
2. Mount the wall bracket to a wall.
Tighten the screws, ensuring
that they are horizontally
driven into the wall. (Must be
installed with recommended
clearances(720mm[29"]) on the edge
of the wall bracket as shown in the
gure)
3. Mount the battery pack to a wall
bracket’s “U” shape clip using the
support by lift handles. Remove the
lift handles.
CAUTION
Battery Pack is heavy around 87kg.
So more than two people should
lift the battery pack up. And be
sure to remove the obstacles from
the surroundings.