Installation Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Installation
- 4 Troubleshooting
- 5 Emergency Situations
- 6 Warranty
- A Technical Information
Installation
Status
Charge / Discharge
RESU 6.4
R
15. Perform the pre-operation checks de-
scribed in Checking Before Operation
on page 29.
16. Perform the procedure described in
Starting the Battery Pack on page 31.
Status
Charge / Discharge
RESU 6.4
R
17. Restore the top cover of the main pack.
If you have another expansion pack, repeat the aforementioned steps to con-
nect the rst expansion pack to the second one.
Securing the expansion pack to a wall
Status Charge / Discharge
RESU 6.4
R
Status Charge / Discharge
Status Charge / Discharge
RESU 6.4
R
Status Charge / Discharge Status Charge / Discharge
Secure the right side of the expansion battery pack to the wall using a mount-
ing bracket. If the expansion pack is additionally installed later, remove the
27