Installation Manual

Installation
8. Adhere the expansion pack closely to
the main pack.
Status
Charge / Discharge
RESU 6.4
R
9. A terminal resistor is attached to the
communication port in the middle.
Remove it from the port.
10. Connect the cables to the connectors.
1) The connector on the left supplies
power to the expansion pack for
operation.
2) The main pack communicates
with the expansion pack through
the port in the middle.
3) The expansion pack charges and
discharges through the connector
on the right.
11. Attach the terminal resistor detached
from the main pack to the unused
port on the right side of the expansion
pack.
25