Installation Manual

Installation
NOTE
If one or two expansion battery packs should be installed together, take the
full length of the battery packs into account to determine the appropriate
position for the mounting bracket on the right side.
Status
Charge / Discharge
RESU 6.4
R
Status
Charge / Dis
charge
Status
Charge / Discharge
RESU 6.4
R
Status
Charge / Discharge
Status Charge / Dis
cha
r
ge
2. Drive the anchor bolts through the
mounting brackets into the holes.
3. Tighten the nuts to a torque of 6 N·m.
S
tatus
Charge / Discharge
R
ESU 6.
4
R
4. There are holes for mounting brackets
on both edges of the back. Cut the re-
movable pieces out of the holes using
a wire cutter.
5. Secure the mounting brackets to the
holes using the M5 screws. Tighten the
screws to a torque of 4 N·m.
17