Installation Manual RESU 13
Table Of Contents
- About this manual
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
5
1 Safety
NOTE
To use rechargeable batteries, installers are required to comply with standard AS
4086.2 in Australia, VDE-AR-E2510-2 in Germany, and the domestic legislation in
other countries.
1.1 Symbolsonproductlabels
The nameplate is attached to the left side of the battery pack, and the warning label
is attached to the top.
The voltage of this battery pack is strong enough to cause electric shock.
Make sure that the battery polarity is connected correctly.
Keep the battery pack away from open amer or ignition sources.
Keep the battery pack away from children.