Installation Manual RESU 13
Table Of Contents
- About this manual
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
38
7 Commissioning
7.1 Status indicators
7.1.1 Batterypack
There are four LED indicators on the front of the battery packs to show its operating status.
ON: This indicator stays on while the battery pack is supplied with power for operation.
Charging: This stays on while the battery pack is charging.
Discharging: This stays on while the battery pack is discharging.
Warning: This comes on when the battery pack is in a warning state. See Troubleshooting
onpage41.