Installation Manual RESU 13

37
6.2 ConguringRESUPlus
SW select CAN_H CAN_L GND TermRes
Switchnumber Type Label Default
1 DIP SW select 0011
2
2 Rotary CAN_H 4
3 Rotary CAN_L 5
4 Rotary GND 2
5 DIP Term Res 11
2
6.2.1 Settingforcommunicationinterface
SW select CAN_H CAN_L GND TermRes
Make sure that the SW select DIP switch is set to 0011
2
.
6.2.2 SettingsforCANbuspins
SW select CAN_H CAN_L GND TermRes
See the section of the same title onpage36.
6.2.3 Settingforterminalresistors
SW select CAN_H CAN_L GND TermRes
Make sure that the TermRes DIP switch is set to 112. See the section of the same
title onpage36.
Conguration Switches