Installation Manual RESU 13
Table Of Contents
- About this manual
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
34
RESU Plus Installation
5.5 Finalizinginstallation
Follow these steps to nalize the installation.
1. Check if the conguration switches on the RESU Plus and both battery packs are set
properly, referring to Conguring RESU Plus on page 41 and ConguringBatterypack
onpage35.
2. Turn on the battery pack as described in Commissioningbatterypackonpage39.
3. Replace the front cover and tighten the screws to a torque of 1 N·m.