Installation Manual RESU 13
Table Of Contents
- About this manual
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
29
The RESU Plus has glands and grommets attached to their own places.
The table below lists the number of each item included.
Power cables 2
Anchor bolts 2
5.3 SecuringRESUPlustowall
Secure the RESU Plus to a wall to prevent it from moving.
1. Remove the front cover of the RESU Plus.
Loosen the screws at each corner of the cover
and pull it up.
2. Loosen the screws at each corner of the metal
plate that supports the circuit board. Be careful
not to separate the circuit board from the metal
plate.
RESU Plus Installation