Installation Manual RESU 13
Table Of Contents
- About this manual
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
28
5 RESU Plus Installation
NOTE
Skip this chapter if only one battery pack is to be installed.
5.1 Unpacking
Unpack the RESU Plus from its packaging.
1. Cut the packing tape and open the carton.
2. Remove the cover of the inner box.
3. Pull out the RESU Plus.
4. Check if the RESU Plus is damaged.
5. Keep the carton for future storage or
transportation.
5.2 Packageitems
These items are included in the package.
RESU Plus Anchor bolts Power cable